| Jeep, Truck & SUV Winches: WARN 9.0Rc |
| |
 |
WARN 9.0Rc
A compact, lightweight winch for rock crawlers |
Competitive rock crawling means tackling tough climbs, intense
approach angles and tight turns. That's why rock crawling rigs need a low-profile,
lightweight winch like the WARN 9.0Rc that delivers maximum power in a compact, 54-lb. unit.
The 9.0Rc is a winch built for rock crawlers looking for efficiency, reliability
and legendary WARN performance.
- 4.8 hp series wound motor delivers 9,000 lbs. of pulling capacity, and
fast line speed under load
- Next-generation control pack delivers
long duty cycles
- New-style remote control
- 50' of 3/8" (15 m of 9.5 mm)
diameter synthetic rope combined
with a rugged, 360-degree swivel
hook and thimble
- Ballistic nylon sliding sleeve that
provides extra rope protection against
abrasion and wear
- Aluminum hawse fairlead
- Exclusive multi-segment cam actuated
brake for positive operator control
during winching
- Gloss red paint with primer undercoat
gives superior corrosion resistance
| PN 71550 $1,960.99 |    | | * Typically ships within 2 business days |
|
| 9.0Rc SPECS/PART NUMBER |
| Part Number: 71550 |
| Rated Line Pull: 9,000 lbs. (4080 kgs) single-line |
| Rated line pull: 9,000 lbs., (4080 kgs.) single-line |
| Motor: Series Wound, 12V 4.8 hp |
| Electrical controls: Contactor |
| Remote Control: Remote switch, 12 ft (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear ratio: 216:1 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum diameter/Length: 2.75 in/4.75 in (7.0cm/12cm) |
| Weight: 54 lbs. (24.8kgs.) |
| Rope: 50 ft, 3/8 in (15m, 9.5mm) Synthetic Rope |
| Fairlead: Polished Aluminum Hawse |
| Recommended Battery: 650 CCA minimum for winching |
| Battery leads: 2 gauge, 72 in (1.83m) |
| Finish: Gloss red paint over primer undercoating |
|
| PERFORMANCE SPECIFICATIONS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
42 (12.8) |
80 amps |
1/9000 (4082) |
| 2000 |
16 (4.88) |
200 amps |
2/7280 (3302) |
| 4000 |
11.9 (3.63) |
285 amps |
3/6670 (3026) |
| 6000 |
9.79 (2.98) |
350 amps |
4/6230 (2826) |
| 8000 |
8.01 (2.44) |
435 amps |
|
| 9000 |
6.4 (1.94) |
465 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
| Winch Dimensions: 16.8" L. x 6.3" D. x 7.6" H. (427mm L. x 160mm D. x 194mm H.) |
| Mounting Bolt Pattern: 6" x 4.5" (151mm x 114.3mm) |
|
|
|
Replacement Parts 
9.0Rc Operator's Manual
