| |
 |
| WARN M8000 |
| PN 20910 - 12V, 80' wire rope, hawse fairlead |
|
| PN 26502 - 12V, 100' wire rope, roller fairlead |
|
| PN 265032 - 24V, 100' of wire rope, roller fairlead |
 |
* Items typically ship within 2 business days
COMPACT, TOUGH AND RELIABLE
An outstanding value for trucks, sport utility vehicles and
Jeeps. The M8000, with its 4.8-hp
Series Wound motor and 3-stage planetary geartrain,
packs 8,000 lbs. of pulling power to get
the job done. Available with either 80' of wire rope and
hawse fairlead or 100' of wire rope and
roller fairlead. Pulls a fast 8 ft. per minute at rated load.
|
| M8000 SPECS/PART NUMBERS |
| Rated Line Pull: 8,000 lbs. (3630 kgs) single-line |
| Intended Use: Vehicle Recovery / For Trucks and SUVs |
| Motor: 12V 4.8 hp, 24V 2.1 hp, Series Wound |
Duty Cycle Rating:  |
| Remote Control: Remote, 12' (3.7m) lead |
| Geartrain: 3-Stage Planetary |
| Gear Ratio: 216:1 |
| Lubrication: Aeroshell #17 |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 74 lbs. (34 kgs.) |
| Wire Rope: 80', 5/16" diam. (24m, 8mm diam.) or 100', 5/16" diam. (30m, 8mm diam.) |
| Fairlead for PN 20910: Hawse |
| Fairlead for PN 26502, 265022, 265032: Roller |
| Recommended Battery: 650 CCA minimum for winching |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Argent Gray Powder Coat |
| Nuts/Bolts: PN 39625 |
|
| 12V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
42(12.8) |
80 amps |
1/8000(3629) |
| 2000(910) |
16(4.88) |
200 amps |
2/7280(3302) |
| 4000(1810) |
11.9(3.63) |
285 amps |
3/6670(3026) |
| 6000(2720) |
9.79(2.98) |
350 amps |
4/6230(2826) |
| 8000(3630) |
8.01(2.44) |
435 amps |
|
|
| 24V DC PERFORMANCE SPECS |
Line Pull
Lbs.(Kgs.) |
Line Speed
FT./min(M/min.) |
Motor
Current |
Pull by layer
layer/Lbs(Kgs.) |
| 0 |
27.3 (8.32) |
46 amps |
1/8000 (3629) |
| 2000 (910) |
17.1 (5.21) |
99 amps |
2/7460 (3384) |
| 4000 (1810) |
12.6 (3.84) |
145 amps |
3/3980 (3166) |
| 6000 (2720) |
10.3 (3.14) |
190 amps |
4/6620 (3003) |
| 8000 (3630) |
8.8 (2.68) |
235 amps |
|
|
| |
| Above performance specs are based on first layer of drum |
|
Winch Dimensions: 21.04" L. x 6.3" D. x 7.6" H.
(534mm L. x 160m D. x 193mm H.) |
| Mounting Bolt Pattern: 10.0" x 4.5" (254mm x 114.3mm) |
|
|
|
Replacement Parts 
PN 20910 Parts List 
